Mini Inverter - 1 hp - Single Phase AC - FRENIC-Mini Series by Fuji

Condition: New
Brand: FUJI ELECTRIC
MPN: FRN0005C2S-6U
MPN Xref:FRN0005C2S-6U

The Mini Inverter is a single phase AC inverter with a maximum output power of 1 hp. It accepts input control signals of 0-10V DC, 0-5V DC or 4 to 20mA. The inverter has an adjustable deceleration time of 0 to 3600 sec, includes a brake chopper, and has a control method via keypad. It has LED digital readout displays and an IP20 open enclosure. It is suitable for applications such as centrifugal separators, conveyors, fans, and food processing machines. The Mini Inverter is part of the FRENIC-Mini Series by Fuji.

Item	Mini Inverter
Input Phase AC	Single
Maximum Output Power	1 hp
Output Voltage	200 to 240V
Output Frequency Range	0.1 to 400 Hz
With Bypass / No Bypass	No Bypass
Accepts Input Control Signal	0-10V DC, 0-5V DC or 4 to 20mA
Adjustable Deceleration Time	0 to 3600 sec
Brake Chopper Included	Yes
Control Method	Keypad
Digital Readout	Current, Frequency, PID Operating Data, Speed, Voltage Output
Displays	LED
Enclosure	IP20
Input Type	Analog, Digital
Output Type	Analog, Digital
Input Voltage Range	100V-120V AC +/-10%
Overall Height	5 1/8 in
Overall Depth	5 1/2 in
Start/Stop Control	Programmable
Style	Heat Sink
Torque Application	Constant Torque
Standards	UL, cUL, CE
Input Voltage	115V
Input Frequency	50/60 Hz
Maximum Output Current	4.2 A
Output Phase AC	Three
Enclosure Rating	NEMA 1
With Line Contactor / No Line Contactor	No Line Contactor
Adjustable Acceleration Time	0 to 3600 sec
Application	Centrifugal Separators, Conveyors, Fans, Food Processing Machines, Pumps
Colour	Blue
Control Type	Keypad
Display Type	LED
Dynamic Braking	Yes
Ethernet Port Included	No
Number of Inputs	(5) Digital: (2) Analog
Number of Outputs	(2) Digital: (1) Analog
Output Voltage Range	0V - 230V AC
Overall Width	4 3/8 in
Protection	External alarm input, Ground fault, Input phase loss, Output phase loss detected, Overcurrent, Overheating, Overload, Overvoltage, Short-circuit, Undervoltage
Starting Torque	150%
Torque @ 1 Hz	150%
Series	FRENIC-Mini Series
HP	1
Input Phase	1
Manufacturer	Fuji
Output Phase	3
Model	FRENIC-Mini C2
Item Condition	Factory New
Category	Frequency Drive
Width	4.33 in
Depth	5.47 Inches
Height	5.12 in
Max. HP	1 hp
Max. Output Amps	4.2 A
Manufacturer Part Number	FRN0005C2S-6U
Item Number	FRN0005C2S-6U
Product Series	MINI
Input Range Voltage (AC)	100~120
HP (Constant Torque Rating)	1
Current (Constant Torque Rating)	4.2
Braking Type	DC Injection, Dynamic Braking Transistor Included
Closed Loop	No
AC Line Regenerative	No
Operator Controls	Built In
IP Rating	IP20
Max Frequency	400
Motor Control-Max Level	V/Hz (Scalar)
Mounting	Panel
Package	MINIC20004-4/0005-4/0005-6/0007-4/0010-2/0012-2
Dynamic Braking Trans	Included
Comments	New firmware for permanent magnet motors. Built in RS485 port w/ standard Modbus RTU communication.
Net Weight	2.9 lbs
Gross Weight	3.45 lbs
Family Series	Fuji Drives, Mini Series
Amps (Constant Torque Rating)	4.2 A
SKU	ZO-G2063871
Current Stock	42
Mpn	FRN0005C2S-6U
SubCategory	Motors
Prop 65	WARNING: Cancer - www.P65Warnings.ca.gov
International Shipping	No

Parts of this page were generated by an AI

WARNING: Products on this website can expose you to chemicals including Lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

All orders are subject to inventory availability and approval. We are not responsible or liable for errors in the listings.